I need help with my amp!!?

I have a Power Acoustics TS1440 and it worked for about 5 minutes than the protect light came on, than it blew the fuse, and I changed the fuse 4 times and it just keeps blowing them and the protect light will not turn off! what can I do to fix it? and I also tried turning it off and unplugging it for a while but it still don't work and the instructions don't say anything on how to fix it.I need help with my amp!!?well if you are blowing the fuse in your power wire then need a bigger gauge wire with a bigger fuse, if its in the amp you probly have your subs hooked up in an ohm load the amp cant handle and its drawing to much power and its making it blow fuses. but if its in the power wire you need to make sure the fuse in the line is as big or bigger then what ever fuses you have in the amp. so if your amp has two 30 amp fuses your power wire needs a 60amp fuse or bigger.I need help with my amp!!?Well it looks like you might have a blown sub.. unplug the subs from the amp and turn it on and if still go's into protection then you amp needs to be service...



When this happens the amp was push and the weakest part stop working. either the amp or the subs...



good luck.I need help with my amp!!?How many amps is ur fuse?? U probably have to get a bigger fuse..